X
X

Lineas de Investigación

Lineas de Investigación

  • Publicaciones

    2016. A new synthesis route of ZnO nanonails via microwave plasma-assisted chemical vapor deposition. M.F. Meléndreza, F.Solis-Pomar, C.D.Gutierrez-Lazos, P.Flores, A.F.Jaramillo, A.Fundora, E. Pérez-Tijerina. Ceramics International, 2016Ceramics International (ISI)

    2016, Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite. Víctor San Juan, Eduardo Fernández, Gonzalo Pincheira, Manuel Meléndrez, Paulo Flores. Composite Structures, Volume 138, 2016, pp. 237-242, Composite Structures (ISI)

    2016 New aspects concerning the generation of acoustic emissions in spur gears, the influence of operating conditions and gear defects in planetary gearboxes. Álvaro Barrueto Novoa and Cristián Molina Vicuña. Insight, Vol 58, No 1, January 2016. DOI: 10.1784/insi.2016.58.1.18Insight (ISI)

    2016 Effect of ZnO nanoparticles obtained by arc discharge on thermo-mechanical properties of matrix thermoset nanocomposites. C. Medina M, D. Rojas, P. Flores, E. Perez-Tijerina, M. F. Melendrez. Journal of Applied Polymer Science, 2016Journal of Applied Polymer Science (ISI)

    2016, Respuesta de un harnero vibratorio ante la perdida de rigidez en los apoyos. Manuel Moncada, Cristian G. Rodríguez. Ingeniare. Revista Chilena de Ingeniería. Vol. 24 N° Especial 2016, pp. 25-31Ingeniare. Revista chilena de ingeniería (Scielo)

    2016, Non-Linear Model of Vibrating Screen to Determine Permissible Spring Deterioration for Proper Separation. Cristian Rodriguez, Manuel Moncada, Emilio Dufeu, and Mario Razeto. Shock and Vibration, In PressShock and Vibration (ISI)

    2016, Caracterizacion experimental y modelacion de una bomba de calor reversible para un vehiculo electrico. Cristian Cuevas, Vincent Lemort. Ingeniare. Revista Chilena de Ingenieria. Vol. 24 N° Especial 2016, pp. 40-48Ingeniare. Revista Chilena de Ingenieria (Scielo).

    2015, Condition monitoring of Pump-turbines. New challenges. Eduard Egusquiza, Carme Valero, Alex Presas, David Valentin, Cristian Rodriguez. Journal of the International Measurement Confederation, Volume 67, May 2015, pp. 151-163Journal of the International Measurement Confederation (ISI).

    2015, Evaluating the longitudinal stability of an UAV using a CFD-6DOF model. M. Pablo Sandoval, O. Pablo Cornejo, D. Frank Tinapp. Aerospace Science and Technology, en prensaAerospace Science and Technology (ISI)

    2015, Damage Assessment of Rolling Element Bearing Using Cyclostationary Processing of AE Signals with Electromagnetic Interference. David Quezada Acuña, Cristián Molina Vicuña. In Book: Cyclostationarity: Theory and Methods II (ISBN: 978-3-319-16329-1), Springer.In Book: Cyclostationarity: Theory and Methods II.

    2015, Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. Carlos Medina , Jon M Molina-Aldareguía, Carlos González, Manuel F Meléndrez, Paulo Flores, Javier LLorca. Journal of Composites Materials, 2015, in pressJournal of Composites Materials (ISI)

    2015, Phase Transformations and Crack Initiation in a High-Chromium Cas t Steel Under Hot Compression Tests. Ingrid Neira Torres, Paulo Flores, Anne Marie Habraken, Jacqueline Lecomte-Beckers. Journal of Materials Engineering and Performance, Volume 24 (5), 2015, pp. 2025-2041, Journal of Materials Engineering and Performance (ISI)

    2015, Quality and high yield synthesis of Ag nanowires by microwave-assisted hydrothermal method. Manuel Meléndrez, Carlos Medina, Francisco Solis-Pomar, Paulo Flores, Mani Paulraj, Eduardo Pérez-Tijerina. Nanoscale Research Letters, 2015, pp. 10-48Nanoscale Research Letters (ISI)

    2015, Influence of aramid fibers on the mechanical behavior of a hybrid carbon–aramid–reinforced epoxy composite. Gonzalo Pincheira, Cristian Canales, Carlos Medina, Eduardo Fernandez, Paulo Flores. Journal of Materials: Design and Applications, 2015Journal of Materials: Design and Applications (ISI)

    2015, FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. Ingrid Neira Torres, Gaëtan Gilles, Jérôme Tchoufang Tchuindjang, Paulo Flores, Jacqueline Lecomte-Beckers, Anne Marie Habraken. International Journal of Material Forming, 2015International Journal of Material Forming (ISI)

    2014, Monitoring of rotor-stator interaction in pump-turbine using vibrations measured with on-board sensors rotating with shaft. C.G. Rodriguez, B. Mateos-Prieto, E. Egusquiza. Shock and Vibration 24 (2014), 1-8, Article ID 276796Shock and Vibration (ISI)

    2014, Effects of operating conditions on the Acoustic Emissions (AE) from planetary gearboxes. Cristián Molina Vicuña. Applied Acoustics 77 (2014) 150 -- 158Applied Acoustics (ISI)

    2014, Características vibratorias de transmisiones planetarias de una etapa. Cristián Molina Vicuña. Ingeniare. Revista chilena de ingeniería, vol. 22 Nº 1, 2014, pp. 88-98Ingeniare. Revista chilena de ingeniería (Scielo)

    2014, Numerical Studies on the Hydrodynamic Effect of a Salmon Farm in an Idealized Environment. Pablo Cornejo, Héctor Hito Sepúlveda, Marcelo H Gutiérrez, Gonzalo Olivares. Aquaculture 430, 195-206, 2014Aquaculture (ISI)

    2014, Dynamic and phenomenological vibration models for failure prediction on planet gears of planetary gearboxes. Juan Pablo Torregrosa Koch, Cristián Molina Vicuña. J Braz. Soc. Mech. Sci. Eng. (2014) 36:533-545J Braz. Soc. Mech. Sci. Eng. (ISI)

    2014, Cyclostationary Processing of Vibration and Acoustic Emissions for Machine Failure Diagnosis. Cristián Molina Vicuña, David Quezada Acuña. In Book: Cyclostationarity: Theory and Methods (ISBN: 978-3-319-04186-5), Springer.In Book: Cyclostationarity: Theory and Methods

    2014, The influence of carbon fabric weave on the in-plane shear mechanical performance of epoxy fiber-reinforced laminates. Carlos Medina, Cristian Canales, Carolina Arango, Paulo Flores. Journal of Composites Materials, Volume 48 (23), 2014, pp. 2871-2878Journal of Composites Materials (ISI)

    2013, Modelo dinámico de la zona de contacto en prensas de máquinas papeleras. Pedro Saavedra González, Francisco Saavedra Padilla. Revista de Información Tecnológica, vol 24 Nº4, pp. 75-84Revista de Información Tecnológica (Scielo)

    2013, Diagnóstico de la condición de las barras de motores de inducción. Pedro Saavedra González, Christian Talbot. Revista de Información Tecnológica, vol 24 Nº4, pp. 85-94Revista de Información Tecnológica (Scielo)

    2013, The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites.Carolina Fernández, Carlos Medina, Gonzalo Pincheira, Cristian Canales, Paulo Flores. Composites: PartB, Volume 55, 2013, pp. 421-425Composites (ISI)

    2012, Failure investigation of a large pump-turbine runner. E. Egusquiza, C Valero, X. Huang, E. Jou, A. Guardo, C. Rodriguez. Engineering Failure Analysis 23, 27-34Engineering Failure Analysis (ISI)

    2012, Capability of structural-acoustical FSI numerical model to predict natural frequencies of submerged structures with nearby rigid surfaces. C.G. Rodriguez; P. Flores; F.G. Pierart; L.R. Contzen; E. Egusquiza. Computers & Fluids, 35, 117-126Computers & Fluids (ISI)

    2012, Theoretical frequency analysis of vibrations from planetary gearboxes. Cristián Molina Vicuña. Forschung im Ingenieurwesen: Volume 76, Issue 1 (2012), Page 15-31Forschung im Ingenieurwesen (ISI)

    2012, Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations. Carlos Guzmán, Jun Gu, Joost Duflou, Hans Vanhove, Paulo Flores, Anne Marie Habraken. International Journal of Solids and Structures, Volume 49 (25), 2012, pp. 3594-3604International Journal of Solids and Structures (ISI)

    2012Testing and modeling. International Journal of Refrigeration. Cuevas C., Fonseca N., Lemort V.. International Journal of Refrigeration, Volume 35, Issue 4, June 2012, pp. 841-849International Journal of Refrigeration (ISI)

    2011, Thermo-hydraulic characterization of a louvered fin and flat tube heat exchanger. Cristian Cuevas, Danielle Makaire, Laurent Dardenne, Philippe Ngendakumana. Experimental Thermal and Fluid Science 35 (2011) pp. 154-164Experimental Thermal and Fluid Science (ISI)

    2011, Experimental study of the energy and thermal comfort performance of chilled ceiling panels. Néstor Fonseca Diaz and Cristian Cuevas. HVAC&R Research, 17(3):337-393, 2011HVAC&R Research (ISI)

    2011, Thermo-hydraulic characterization of an automotive intercooler for a low pressure EGR application. Cristian Cuevas, Danielle Makaire, Philippe Ngendakumana. Applied Thermal Engineering 31 (2011) pp. 2474-2484Applied Thermal Engineering (ISI)

    2011, Mathematical Modeling of Coal Gasification in a Fluidized Bed Reactor Using Eulerian Granular Description. Pablo Cornejo, Oscar Farías. International Journal of Chemical Reactor Engineering, vol. 11, 2011, Article A2International Journal of Chemical Reactor Engineering (ISI)

    2010, Characterization of a scroll compressor under extended operating conditions. Cristian Cuevas, Jean Lebrun, Vincent Lemort, Eric Winandy. Applied Thermal Engineering 30 (2010) pp. 605-615Applied Thermal Engineering (ISI)

    2010, Radiant ceiling systems coupled to its enviroment part 1: Experimental analysis. Néstor Fonseca, Cristian Cuevas, Vincent Lemort. Applied Thermal Engineering 30 (2010) pp. 2187-2195Applied Thermal Engineering (ISI)

    2010, Radiant ceiling systems coupled to its enviroment part 2: Dynamic modeling and validation. Néstor Fonseca, Stephane Bertagnolio, Cristian Cuevas. Applied Thermal Engineering 30 (2010) pp. 2196-2203Applied Thermal Engineering (ISI)

    2010, Testing and thermal modeling of radiant panels systems as comissioning tool. Néstor Fonseca Díaz, Cristian Cuevas. Energy Conversion and Management 51 (2010) pp. 2663-2677Energy Conversion and Management (ISI)

    2010, Natural convection at an indoor glazing surface with different window blinds. Cristian Cuevas, Adelqui Fissore, Nestor Fonseca. Energy and Buildings 42 (2010) pp. 1685-1691Energy and Buildings (ISI)

    2010, Experimental and theoretical study of adiabatic humidification in HVAC&R applications. Néstor Fonseca, Cristian Cuevas. Ingeniare. Revista chilena de ingeniería, vol. 18 Nº2, 2010, pp. 243-252Ingeniare. Revista chilena de ingeniería (Scielo)

    2010, Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Paulo Flores, Víctor Tuninetti, Gaëtan Gilles, Pierre Gonry, Laurent Duchêne, Anne Marie Habraken. Journal of Materials Processing Technology 210 (2010) pp. 1772-1779Journal of Materials Processing Technology (ISI)

    2009, Testing and Modeling a Scroll Expander Integrated into an Organic Rankine Cycle. Lemort, V., Quoilin, S. Cuevas, C. y J. Lebrun. Applied Thermal Engineering 29, 3094-3102Applied Thermal Engineering (ISI)

    2009, Development and Validation of a Condenser Three Zones Model. Cuevas, C., Lebrun, J., Lemort, V. y P. Ngendakumana. Applied Thermal Engineering 29, 3542-3551Applied Thermal Engineering (ISI)

    2009, Testing and Modelling of a Variable Speed Scroll Compressor. Cuevas, C. y J. Lebrun. Applied Thermal Engineering 29, 469-478Applied Thermal Engineering (ISI)

    2008, Development of Simple Cooling Coil Models for Simulation of HVAC Systems. Lemort, V., Lebrun, J., Cuevas, C. e I.V. Teodorese. ASHRAE Transactions 114(1), 219-328ASHRAE Transactions

    2008,Testing and Modeling of an Automotive Wobble Plate Compressor. Cuevas, C., Winandy, E. y J. Lebrun. International Journal of Refrigeration 31(3), 423-431International Journal of Refrigeration (ISI)

    2008, Rotation of axes for anisotropic metal in FEM simulations. L. Duchene, T. Lelotte, P. Flores, S. Bouvier, A.-M. Habraken. International Journal of Plasticity, 2008International Journal of Plasticity (ISI)

    2007, Theoretical and Experimental Study of the Natural Draft in Chimneys of Buildings for Domestic Gas Appliances.Farías O. Jara F. and Betancourt R.. Energy & Buildings (2007)Energy & Buildings (ISI)

    2007, Thermal Simulation of an Attached Sunspace and its Experimental Validation. Mottard, J.-M. y A. Fissore. Solar Energy 81, 305-315Solar Energy (ISI)

    2007, Numerical Simulation of Fluid Added Mass Effect on a Francis Turbine Runner. Liang, Q.W., Rodríguez, C.G., Egusquiza, E., Escaler, X., Farhat, M. y F. Avellan. Computers & Fluids 36, 1106-1118Computers & Fluids (ISI)

    2007, Model Identification and FE Simulations: Effect of Different Yield Loci and Hardening Laws in Sheet Forming. Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J. y A.M. Habraken. International Journal of Plasticity 23, 420-449International Journal of Plasticity (ISI)

    2007, Plane Strain Test for Metal Sheet Characterization. Flores, P., Bonnet, F. y A.-M. Habraken. Key Engineering Materials 344, 135-142Key Engineering Materials (ISI)

    2007, Measurement Results and Experimental Analysis Study of the Thermal Balance of a Window. Fissore, A. y N. Fonseca. Building and Environment 42, 3570-3581Building and Environment (ISI)

    2007, Experimental Study of the Thermal Balance of a Window, Design Description. Fissore, A. y N. Fonseca. Building and Environment 42, 3309-3321Building and Environment (ISI)

    2007, Frequencies in the Vibration Induced by the Rotor Stator Interaction in a Centrifugal Pump-Turbine. C. G. Rodriguez, E. Egusquiza, I. F. Santos. ASME Journal of Fluids Engineering 129, 1428-1435ASME Journal of Fluids Engineering (ISI)

    2007, Online monitoring system for mining shovels focused on vibration analysis. P.N. Saavedra and C.J. Molina Vicuña. CIM Bulletin, Vol. 100, No. 1101 (2007) 1--9CIM Bulletin (ISI)

    2006, Robust Parameter Identification Using Forced Responses. Pascual, R., Schälchli, R. y M. Razeto. Mechanical Systems and Signal Processing 21, 1008-1025Mechanical Systems and Signal Processing (ISI)

    2006, Experimental Investigation of Added Mass Effects on a Francis Turbine Runner in Still Water. C. G. Rodriguez, E. Egusquiza, X. Escaler, Q. W. Liang y F. Avellan. Journal of Fluids and Structures 22, 699-712Journal of Fluids and Structures (ISI)

    2006, Accurate assesment of computed order tracking. P.N. Saavedra, C.G. Rodriguez. Shock and Vibration, 13, 13-32Shock and Vibration (ISI)

    2005, A Simple Method of Estimating the Maintenance Cost of Airframes. Salamanca, H.E. y L.L. Quiroz. Aircraft Engineering and Aerospace Technology 77(2), 148-151Aircraft Engineering and Aerospace Technology (ISI)

    2005, Superposition of Flight Loads for a Probabilistic Damage Tolerance Design for an Acrobatic Aircraft. Salamanca, H.E. y L.L. Quiroz. Aircraft Engineering and Aerospace Technology 77(6), 478-485Aircraft Engineering and Aerospace Technology (ISI)

    2005, New Revolution-Order Transform for Analysing Non-Stationary Vibrations. Saavedra, P.N. y J.A. González. Insight 47(1), 29-35Insight (ISI)

    2005, Improvement of Damage-Assessment Results Using High-Spatial Density Measurements. Pascual, R., Schälchli, R. y M. Razeto. Mechanical Syste, ms and Signal Processing 19, 123-138Mechanical Systems and Signal Processing (ISI)

    2005, Development of an Experimental Equipment for the Identification of Constitutive Laws. Flores, P.A.. Applied Mechanics and Materials 3-4, 91-97Applied Mechanics and Materials (ISI)

    2005, Development of an Experimental Equipment for the Identification of Constitutive Laws. Flores, P., Rondia, E. y A.-M. Habraken. International Journal of Forming Processes, 117-137International Journal of Forming Processes (ISI)

    2004, Vibration Analysis of Rotors for the Identification of Shaft Misalignment. Part 2: Experimental Validation. Saavedra, P.N. y D.E. Ramírez. Journal of Mechanical Engineering Science 218 Part C, 987-999Journal of Mechanical Engineering Science (ISI)

    2004, Vibration Analysis of Rotors for the Identification of Shaft Misalignment. Part 1: Theoretical Analysis. Saavedra, P.N. y D.E. Ramírez. Journal of Mechanical Engineering Science 218 Part C, 971-985Journal of Mechanical Engineering Science (ISI)

    2004, Natural Convection at an Indoor Glazing Surface. Cuevas, C. y A. Fissore. Building and Environment 39, 1049-1053Building and Environment (ISI)

    2003, Real-time monitoring and characterization of flames by principal component analysis,. Sbarbaro D., Farías O. and Zawadsky A.. Combustion and Flame 132 (3), 591 - 595Combustion and Flame (ISI)

    2003, Analysis of the Oil Return in a Pair of Scroll Compressors Working in Parallel at Part Load. Winandy, E.L. y C. Cuevas. Applied Thermal Engineering 23, 623-636Applied Thermal Engineering (ISI)

    2003, New Approach for performance testing of air-cooled condensing units. Cuevas, C. y E. Winandy. Experimental Thermal and Fluid Science 2003; 27(7): 781-787Experimental Thermal and Fluid Science (ISI)

    2003, Simulation of Impact Between Rigid Elements. Barrientos, G. y L. Baeza. International Journal of Solids and Structures 40, 4943-4954International Journal of Solids and Structures (ISI)

    2002, Vibration Analysis of Rotor for Crack Identification.. Saavedra P., Cuitiño L.. Journal of vibration and control, Volume 7, 2002.Journal of Vibration and Control (ISI)

    2002, Vibration Analysis Applied to Low Speed Machines in Pulp and Paper Industries.. Saavedra P., Estupiñán E.. Tappi Journal, January 2002, Vol 85, Nº1.Tappi Journal (ISI)

    2002, Vibration Analysis of Rotor for Crack Identification . Saavedra P., Cuitiño L.. Journal of Vibration and Control, Volume 7, 2002.Journal of Vibration and Control (ISI)

    2002, Simplified Modelling of an Open-Type Reciprocating Compressor. Winandy, E., Saavedra, C. y J. Lebrun. International Journal of Thermal Sciences, Volume 41, Issue 2, February 2002, Pages 183-192International Journal of Thermal Sciences (ISI)

    2002, Experimental analysis and Simplified Modelling of a Hermetic Scroll Refrigeration Compressor. Winandy, E., Saavedra, C. y J. Lebrun. Applied Thermal Engineering, Volume 22, Issue 2, February 2002, Pages 107-120Applied Thermal Engineering (ISI)

    2002, Vibration Analysis of Mining Shovels. P.N. Saavedra, E.A. Salamanca. Canadian Institute of Mining, Meallurgy and Petroleum CIM Bulletin, 95, 1-66Canadian Institute of Mining Journal (ISI)

    2002, Integrated approach to induction motor fault diagnosis. Saavedra p., Estupiñán E.. Integrated approach to induction motor fault diagnosisVibration Vol. 18, p-p. 4-8

    2001, Condition monitoring of variable-speed and load machinery using time-frequency distributions. Saavedra P. , Araya F.. INSIGHT Vol. 43, Nº8, August 2001, pp. 526-530.Insight (ISI)

    2001, Crack detection and vibration behavior of cracked beams. Saavedra P., Cuitiño L.. Computers and Structures, Volume 74 Nº16, june 2001, pp. 1451-1459.Computers & Structures (ISI)

    2001, Crack detection and vibration behavior of cracked beams. Saavedra P., Cuitiño L.. Computers and Structures, Volume 74 Nº16, june 2001, pp. 1451-1459Computers and Structures (ISI)

    2001, Condition monitoring of variable-speed and load machinery using time-frequency distributions. Saavedra P. , Araya F.. INSIGHT Vol. 43, Nº8, August 2001, pp. 526-530Insight (ISI)

  • Evaluation of the fill yarns effect on the out-of-plane compressive fatigue

    2016, Evaluation of the fill yarns effect on the out-of-plane compressive fatigue behavior for an unidirectional glass fiber reinforced epoxy composite. Víctor San Juan, Eduardo Fernández, Gonzalo Pincheira, Manuel Meléndrez, Paulo Flores. Composite Structures, Volume 138, 2016, pp. 237-242, Composite Structures (ISI)